PA0O ham radio

final result   CQ160CW lowpower After CQ160  contest   at 80M RI1ANT at 3510 very weak CW had mni WSPR decodes at 80 from the Rusian Antarctic base. EP6T 3503kHz  real! 599 but like most DXpeditions  hopeless to get trough low QSO rate many callers as if they have S9 QRM Dxpeditions better restrict TX power to 100W to get TX/RX  in balance thats what I think then. CQ160CW : Sunday early evening some more JA's heard  in QSO with Rusian hams. Sunday early morning  04 local propagation  better then expected. Nice DX workable with 100W    ( drops to 80W sometimes ) ZF2DX  real strong  said up but worked simplex zf2dx_160.mp3 audio level overdriven   can not be adjusted ?  to high or to low same audio card has normal level for digimodes. Seems okay now after uninstalling WSJT10   WSJT7 did decode again for some unknown reason it did not decode FSK441 bursts from SP9HWY at 70.230 MHz WSJT10 ha...

nu dit weer.. Problem solved Deleted in registery  2 Nport entries  one of them using com2 But why this problem appeared just now ? in the past on this PC I might have used Moxa Nports  network ports but not recently Anyway this can explain that some software is interfered and other not This nports are mapped into the system but do not appear in the hardware list. That is if not the windows WHQL is used but the nport administrator this must have been the cause New error today with com port that supposed to be used by some other program I have no other programs using COM2 How ever a lot of  malware can hijack any comport  some programmers have no idea about comports they allocate it  like it is RAM. Strange ting is N1MM is normal online the communication polling is normal T/R  and CW with COM2 (used here) is normal except that the message above pops up Probleem gevonden nport serial ports in de registery 1 bezette com2 ...