Skip to main content

Posts

Showing posts with the label K3

Veron DAC 23cm derde Dinsdag 21 Juni 2022 Zonnewende

  Noorder hemel om middernacht JO33HG zonnewende 2022-06-21 17:00UTC tot 2022-06-21 21:00UTC 1296 MHz  USB CW 1m2 schotel Xverter aan de schotel ca 100W SKY161 0.6dB S/R 25 QSO     uit PA alleen PA5Y Conrad gehoord   Hoofdzakelijk activiteit in Scandinavië en Engeland  De Engelse  contest begint en eindigt 1 uur later helaas het loopt niet in de pas. Noordzee inversie  tropo  zo'n beetje de 1 e keer dit jaar LA1UHG zwak hoorbaar   GB3MHZ s9 GB3NO ook hoorbaar normaal niets  50 MHz 50313 en 50323  langdurige opening vanuit Balkan naar Westkust USA hier alleen EU hoorbaar..  Ben ook weer op 4M QRV met 5 ele  paar keer ES EA1  EA7  tot nu toe Heb een IC7100 aangeschaft heel mooie Icom set met HF 6m 4m 2 en 70cm Pas wel op dat je de zgn. ALC modificatie NIET laat doen ivm heftige overshoot kan je je PA kosten Verder is de ontvangst op 6m erg rustig vergeleken met de K3 K3 ATU C10 3900pF defect Mijn K3 ...

K3 with 144MHz XVTR integrated

Meantime i use the old IC706 had some RX IMD issue with very strong local signals also switching T/R had some TX spike that activated my SWR protection hence de TX is disabled until reset with power cycle. The Hi-level mixer XVTR  tried also but still blocking on strong local signals Possible i need to adjust the the level of  116 injection.  This is how the 144/28 transverter.store fits into the K3 with 2nd Rx and KXV3 Also with the original  Elecraft  144MHz  you will need to fit an extra Antenna connector  BNC I drilled an  20mm pass trough hole to lead the  coax  through the PA compartment to the 144 BNC This is a delicate job it needs precautions to avoid damage. I removed the left side panel and used a trapped small multi hole drill with an extension hexa shaft. those one's are available at eBay and are very good to have. An automatic 12V 144 band  power switch must be added. A P-channel IRF95...

Archive

Show more