Skip to main content

PACC 2022

 


PAC CW 100W again

 Propagation very good this year even 28MHz  open last weeks to VK3 VK7 VU HS
The PACC has a group loyal CW friends present every year 

Russian hams manage to work 700+ !

It is a relative small 24 hour contest
We have to share "our"  weekend   with de big RTTY DX.
Band wide open but running empty CQ too much ..
 My Soapbox :

Many thanks to the PACC friends to make it special again.
10 15 good open, very promising RBN spots
Sunday sunrise 160 exceptional good N-A RBN spots strong signals from the few
PACC friends fb! ,a lot more QSO's should have been possible
15 and 10 many spots by RBN: VK4CT E28AC PJ2A 3B8CW  bands  real open.
No reply from these areas except 15m VK4FOMP odd call sign weak but QRP!
In the night I took a long QRX only RBN spots showed 40m was still wide open
Overall it felt like a waste of good propation. I missed my rotary 40m dipole.that could have gave me some more contacts.


CU all again, sorry at times struggling with a new soft key's keyboard..
100W CW  K3  3ele STEPPIR  g.p.40 and wires
We where lucky with high SFI and good weather  12/13 February.
The weekend after, complete different with heavy storm depressions 10- 12 BF wind
All antennas removed and Steppir the elements stored in the barn,  23cm dish  2 4 6m antenna also.
130km/h  gusts  no severe damage in the night a never ending grumbling 12 hour long 8 - 12 B.F.
And still  more nasty storm depressions  heading our way.
 
This weekend   ARRLDX CW .
Only 1/4 wave 40m g.p.survived , relative good signals in the first night.
Saturday / Sunday night it calmed down a weather break  i raised the 25m mast to get the pulley up for at least 80m i-V  and i-L 160m back for the night, headlight on but it was dry and no wind for a change... needed the re-balance to compensate the removed antennas.
Another night operation i like that as a challenge but my wife called it madness.
But  N.A. signals at 80 and 160  disappointing  weak.What a difference with the previous weekend with good low band signals according the many RBN spots i got at the low bands aft 1x CQ
heard ZL3TX good AT 80M working ARRL but direction N.A. was bad here. At morning sunrise the N.A. signals even worse rare to see the N1MM band map almost empty during a major contest !
This must have been 1 of my worst ARRL-DX  ever. Missing the Steppir the high band are out..

dismantled Steppir  depressive  weather 


 113QSO /46 States  40  and a few 80 160

 3 STORMS in a row never ending   DUDLY EUNICE FRANKLIN   


Comments

Archive

Show more

Popular posts from this blog

2011-01-22 DIAMOND 2m 70cm 1m30 Colinear inside

Having relative poor signals on the local 70cm / 2m channels using this X50 Diamond collinear 70/2  1m antenna at a height of 25m. I needed to investigate what could be wrong. Measuring the cable only 3W is left for the antenna of the 10W 435MHz output from a IC451E The cable is 30m type H100 Z50 10mm outside diameter it is semi air-spaced but has an impossible 4mm² solid CU inner conductor not much air left. I preferred the H43 Z75 cable having lower loss and mechanical better ratio in conductor size. My antenna uses SO239 connector UHF type semi air spaced isolator.  3W should be enough for a comfortable noise free FM signal. But only 27km away at PA0A the signal is weak too weak something must be wrong? I made a simple reference dipole of 2x17cm CU wire. With this dipole the signals where totally worse. So the Diamond does work? I got curious to look inside. Maybe moisture penetration degraded the antenna. This  antenna is rainwater close in its normal vertical mounting posit

SPF5189z Low noise preamp 23cm

 14-4-2018 updated Above the low noise  preamp 50 - 4GHz    ebay  6€ Tested  2 small porto antennas 1 Baofeng UV antenna left   2nd best signal on PI2NOS 2 eBay DIAMONDSRH805S  wide band 144/432/1200  it works for its size as expected 3 piece of wire :   best signal in the setup... Unit under test at workbench. It was stable  50mA  at 5V   few days,  but sudden the current went up to 100mA And i could  no longer adjust it with the negative bias Voltage. The - Voltage went to zero and the SPF input port became low Z. This SPF5189z was broken  no oscillations, no input overload just it broke while i was receiving the PI2NOS 430.125 using a small antenna at the workbench. The specs of  SPF5189z  say it has an internal circuit  regulating the bias current. Replaced . again   with an other of the 5 spare SPF i have. The new one again could be adjusted at 50mA  5V  The current raises to 150mA  when removing the  negative gate voltage. Where is that internal bias cir

BIJZEN mast en ontwerp fouten.

In 2013 heb ik een Bijzen aluminium mast 3 x7m  opgehaald  bij iemand die hem niet mocht plaatsen Gemeente Oss  dat zegt misschien al genoeg.. Pas in 2018 heb ik hem geplaatst had ik veel eerder moeten doen. Mooie mast, mijn xyl vond hem zelfs mooi. Hij is licht, de 3 delen wegen  235kg  het vaste deel 102kg dus het te lieren gedeelte weegt   slechts 133kg + ca 50kg rotor + antennes etc.  De elektrische lier is wel erg zwaar 30kg misschien wel maar die zit onder    Antenne  3ele Steppir  19kG  +  G2500DXC rotor: 3.6kg  + rotorbuis 12 kg  +  kabels 10kg  + 5/7 ele 6m beam. ongeveer 50kg Je moet niet te dichtbij  kijken, dan valt op dat het Aluminium lastwerk heel slordig is gedaan, scherpe bramen aan de lassen waar kabels door kunnen worden beschadigd of haken Er is zeer ! weinig ruimte voor de rotor een YAESU G2500DX past net maar dan ook net  met beetje buigen van  kruisverband. Het Rotor platform kan wel een meter hoger dat geeft meer  buislengte boven het zit nu op 3.5 meter van het