Skip to main content

VP8PJ 5th stormy weekend in a row

Saturday evening  40m rotary dipool in the endless storm winds

Sunday the shunt wire broke after 48 hours high winds no longer tuning at 7Mhz it was a good test only a wire broken


final result i miss 40m LSB QSO but never mind

First QSO in the log: 22 Feb 2020 23:56 UTC
Last QSO in the log: 06 Mar 2020 01:00 UTC

Enter your callsign:        

Log Search result for PA0O


MODE/BAND160 m80 m60 m40 m30 m20 m17 m15 m12 m10 m6 m
CW
FT8
PSK
RTTY
SSB
PA0O worked 11 band slots and has 12 QSOs in the VP8PJ log
Request QSL (OQRS)Not in Log?

VP8PJ  they must suffer hash receiving conditions
Surprize they have a WSPR signal at 40m  decoded VP8PJ many times several evenings
 2020-02-29 22:08  PA0O  7.040023  -17  0  JO33hg  1  DP0GVN-1  IB59ui  13830  186  2 
 2020-02-29 20:38  PA0O  3.570025  -21  0  JO33hg  1  DP0GVN  IB59ui  13830  186  5 
 2020-02-29 21:40  DP0GVN  7.040025  -19  0  IB59ui  2  PA0O  JO33hg  13830  11  3 
 2020-02-29 21:40  VP8PJ  7.040143  -14  0  GC79eh  2  PA0O  JO33hg  13489  34  6

Tonight Sunday at 10.105 CW sudden it was easy 3 calls 10.1085 100W  it can happen..
possible not so busy also on 60m FT8 it was easy
Hard to get in the log even with good good signals 0 -1 -4 in FT8  60m   and 30m  CW S7  no way
at 10.105 they where long time to 559 579 saying up
okay up but how up is up ?  at  30m  i can not hear any of the  EU callers so no indication about where to call
up normally means +1 +2  but some cluster spots say +5 +7
so it is blind calling between 1000 DL SP I SV EA F south G all louder?
never knew that there are so many SP active at HF the row of SP seems endless
No response  they keep working DL SP DL SP W DL SP EA endless
i heard their FT8 signal at 12m  -14  but calling seems useless for me
Signals even  in the FT8  window at  24.915 are rare these days
It was a short rare opening possible the only one but they where trying with a W and then faded.
even with the 3 el Steppir and ACOM1000  the pile or high QRM level? is hard to break

Some expedition can be worked relative easy others like VP8PJ are almost unworkable

So far I'm in the log at 80 40 20 17m  and  had an FT8 "QSO" at 15 but  seems not in the log
is it important ? not really but i thought to have some chance with the 3ele good working Steppir and reasonable good dipoles   30 60 80m  but no responce long long calling
A contact that takes 30 seconds in a contest now takes many hours calling an trying to  figure out the operation pattern i must be gone nuts.
My i-L at 160m works well, the 160m experience is hearing is working
but nil at  160 until now.

Suffering every weekend storm winds this year
my new made almost full size 40m dipole is having hard times

 I never received VP8PJ at 160m to my frustration  my Beverage is not good in their QTF S-W
Saw VP8A  calling in FT8 their last night although the next step sending a report was not seen here possible PJ was already packed.
The one time VP8PJ was reported CW 28.023  heard them short deep in noise not even Q5 in JO33hg
A few hundred km south JO21 JO20    reporting workable signal
Here using 3 ele Steppir
 worked 80 40 30 20 15 12



Comments

Archive

Show more

Popular posts from this blog

2011-01-22 DIAMOND 2m 70cm 1m30 Colinear inside

Having relative poor signals on the local 70cm / 2m channels using this X50 Diamond collinear 70/2  1m antenna at a height of 25m. I needed to investigate what could be wrong. Measuring the cable only 3W is left for the antenna of the 10W 435MHz output from a IC451E The cable is 30m type H100 Z50 10mm outside diameter it is semi air-spaced but has an impossible 4mm² solid CU inner conductor not much air left. I preferred the H43 Z75 cable having lower loss and mechanical better ratio in conductor size. My antenna uses SO239 connector UHF type semi air spaced isolator.  3W should be enough for a comfortable noise free FM signal. But only 27km away at PA0A the signal is weak too weak something must be wrong? I made a simple reference dipole of 2x17cm CU wire. With this dipole the signals where totally worse. So the Diamond does work? I got curious to look inside. Maybe moisture penetration degraded the antenna. This  antenna is rainwater close in its n...

SPF5189z Low noise preamp 23cm

 14-4-2018 updated Above the low noise  preamp 50 - 4GHz    ebay  6€ Tested  2 small porto antennas 1 Baofeng UV antenna left   2nd best signal on PI2NOS 2 eBay DIAMONDSRH805S  wide band 144/432/1200  it works for its size as expected 3 piece of wire :   best signal in the setup... Unit under test at workbench. It was stable  50mA  at 5V   few days,  but sudden the current went up to 100mA And i could  no longer adjust it with the negative bias Voltage. The - Voltage went to zero and the SPF input port became low Z. This SPF5189z was broken  no oscillations, no input overload just it broke while i was receiving the PI2NOS 430.125 using a small antenna at the workbench. The specs of  SPF5189z  say it has an internal circuit  regulating the bias current. Replaced . again   with an other of the 5 spare SPF i have. The new one again could be adjuste...

BIJZEN mast en ontwerp fouten.

In 2013 heb ik een Bijzen aluminium mast 3 x7m  opgehaald  bij iemand die hem niet mocht plaatsen Gemeente Oss  dat zegt misschien al genoeg.. Pas in 2018 heb ik hem geplaatst had ik veel eerder moeten doen. Mooie mast, mijn xyl vond hem zelfs mooi. Hij is licht, de 3 delen wegen  235kg  het vaste deel 102kg dus het te lieren gedeelte weegt   slechts 133kg + ca 50kg rotor + antennes etc.  De elektrische lier is wel erg zwaar 30kg misschien wel maar die zit onder    Antenne  3ele Steppir  19kG  +  G2500DXC rotor: 3.6kg  + rotorbuis 12 kg  +  kabels 10kg  + 5/7 ele 6m beam. ongeveer 50kg Je moet niet te dichtbij  kijken, dan valt op dat het Aluminium lastwerk heel slordig is gedaan, scherpe bramen aan de lassen waar kabels door kunnen worden beschadigd of haken Er is zeer ! weinig ruimte voor de rotor een YAESU G2500DX past net maar dan ook net  met beetje buigen van  kruisverband. Het...