PA0O ham radio

  Timestamp Call MHz SNR Drift Grid Pwr Reporter RGrid km az Mode # Spots  2021-10-10 09:56   VK2IJM   28.126114   -13   0   QF56ni   10   PA0O   JO33hg   16473   319   2   1   2021-10-10 09:54   PA0O   28.126070   -25   0   JO33hg   5   VK2EFM   QF56oq   16450   66   2   1   2021-10-10 09:16   PA0O   24.926090   -8   0   JO33hg   10   VK6XT   OF86td   14304   97   2   1   2021-10-10 10:18   VK6WAM   28.126190   -26   -1   OF88   0.2   PA0O   JO33hg   14077   316   2   1   2021-10-10 10:20   PA0O   28.126070   -28   0   JO33hg   5   VK6ACS   OF77ww   14048   97   2   1   2021-10-10 10:18   VK6ACS   28.126133   -22   0   OF77ww   1   PA0O   JO33hg   14048   316   2   1   2021-10-10 16:58   LU4AA   28.126113   -25   -1   GF05sk   0.2   PA0O   JO33hg   11599   34   2   3   2021-10-10 09:16   PA0O   24.926084   -15   0   JO33hg   10   SWLOI33   OI33ks   11243   86   2   2   2021-10-10 17:38 

 PI4GN 432MHz result   I was operator  Saturday.  Propagation  poor, a rain front was blocking UK. PI4GN was on 70 23 13 9 6 3 1.56 cm active despite bad weather we did reach very good distances on the UHF SHF bands PI4GN 432 result IARU October 2021   My home 23cm was deaf no beacons  PI4GN local  signal was only s9 max rainwater intruded  in the slot dipole dish radiator but after i drained it receiving seems normal again, left a small opening in the bottom slot  top closed with tape SWR was back to normal no further damage done i hope   Micro KEYER2  with IC706  The IC706 PA T/R timing sequence issue is solved by the Microham micro KEYER2  The microphone is muted in digimode and i got rid of the external USB Audio QRM at VHF /UHF  The number of cables is drastically  reduced .   The old IC706 is working well together with the home made 200W 144 PA QSK mode without Antenna switching issues ! Without the MK2 i could not use the PA in phone mode since the IC706  RF pulse at R/T activat